Internal Subdivision by Barriers and Partitions
Standard Type Program Motor Starter with Circuit-Breaker, with Thermal Relay
Areas and Centres of Gravity, Volumes and Surface Areas of Solid Bodies
Electrotechnical Symbols as per DIN 1304
Effective Resistances per Unit Length of PVC-Insulated Cables with Copper Conductors as
per DIN VDE 0271 for 0.6/1 kV
Motor Current Ratings for Three-Phase Motors
Effective Sub-Conductor Spacing as for Rectangular Cross Sections of Bars and
U-Sections (all quantities in cm) as per DIN EN 60865-1 (VDE 0103)
Minimum Cross Cections of Protective Conductors to the Cross Section of the Phase
Conductors
Earthing System with Equipotential Bonding between HV/LV Indoor Switchgear and building/building Services
Summary of Network Configurations and Protection Measures for Low-Voltage Installations
Utilization Categories for Contactors as per VDE 0660 Part 102, EN 60947-4-1
Copper Conductors of Rectangular Cross-Section in Indoor Installations. Ambient Temperature 35 °C. Conductor Temperature 65 °C. Conductor
Width Vertical: Clearance between Conductors Equal to Conductor Thickness; with Alternating Current, Clearance Between Phases > 0.8 × Phase
Centre-Line Distance.
Maximum Permissible Cable and Line Lengths
CaIculation of Max. Permitted Pulling Forces & Minimum Bending Radii
Alphanumeric Codes and Symbols in Relation to Colour Coding of Insulated and Bare
Conductors
Cross-Sections of Electrical Conductors & Conversion of Circular Mils into Square millimetres and Square inches
Typical Values for Demand Factor g
Dimensions and Weights of Metal Sheets, DIN EN 10130
